watercolor & silverpoint by Stephen Scott Young

*
Silverpoint: "[...]Because the silver will only register on a surface covered with traditional gesso, casein, or gouache, it is impossible to erase the metallic lines. Even trying to cover up stray lines winds up making the prepared surface looked patched. Most of Young's silverpoint drawings were done on sheets of Fabriano Uno paper coated with traditional gesso (a warm mixture of powdered whiting and rabbit-skin glue).
"The artist spent hundreds of hours developing the small drawings (no larger than 14" x 10") by laying down slightly tilted parallel lines in one direction, and then in another direction so as to create diamond or triangular shapes where the hatched lines crossed. In some places he also added stippled dots and horizontal lines to create a rich dark gray. Silverpoint does not allow for the kinds of deep blacks one can achieve with graphite or charcoal.

Watercolor:
 "His palette was limited to Winsor red, Winsor yellow, ultramarine blue, and white casein paint, which differs from the one he uses to paint the black citizens of the Bahamian island of Eleuthera (where he maintains one of three studios). For those paintings, he uses are painted with French ultramarine, burnt sienna, yellow ochre, brown madder, and white casein paint.

"His watercolor technique, which frequently makes use of drybrush, is self-taught, and based on his admiration for artists like Winslow Homer, Andrew Wyeth, and Thomas Eakins.

watercolor limited palettes:
1)
Winsor red,
Winsor yellow,
ultramarine blue,
and white casein
2)
French ultramarine,
burnt sienna,
yellow ochre,
brown madder,
and white casein

long flat mongoose brush

[Tony] Pro has recently reported, however, that he, Lipking, and Weistling have found a substitute brush which holds up much better than the Langnickel 5590. All three have switched to brushes made by Rosemary & Co.http://www.rosemaryandco.com/about-us-i-9.html, a small, family-run business located in Great Britain, where all the work is still done by hand. Rosemary's series 279, which is a long, flat, Mongoose hair brush, seems to be the closest to the Langnickel 5590, though Pro also uses and recommends the company's Mongoose brights and filberts.

Photographing Artwork

Terry Miura:

My studio lighting isn't perfect, but it's adequate. I have eight 6500K fluorescent tubes, and track lighting with six halogen bulbs. None of the halogen bulbs are pointed directly at the canvas, because they have too much color. (Even the "color corrected bulbs") They're pointed at walls and ceilings to add warmth to the otherwise very cool fluorescent ambient lighting, thus balancing the temperature.

And in this light I paint, and shoot my smaller works. I don't shoot the big canvases in this light because it's not even enough. The big ones are shot outside in open shade or under an overcast sky. Overcast is preferable because the light is more neutral than open shade on a sunny day, where the light source is the blue sky; the light tends to be pretty blue. But here in California, we don't always have overcast skies so I just have to make do.

A good digital camera is a good start. Preferably one that has a white balance setting, where you can adjust the color temperature according to the type of lighting you have; fluorescent, tungsten, open shade, overcast, sunlight, etc. Whether I'm shooting my paintings inside or out, I try a bunch of different white balance settings to find which one comes closest to accurate color. I often move my painting around, trying different spots around the house, inside and out. Hey it's digital so it's not like you're wasting film. I just delete the dozen shots that I don't want.

So White Balance Setting is one convenient tool. But that doesn't address the glare on the surface of the canvas. If you are using a digital SLR, a good investment is a polarizing filter. This filter can cut down the glare considerably. It doesn't have to cost a whole lot, either. Mine is a Hoya and I paid twenty something dollars. Totally worth it.

If you're not using a SLR, there's still the biggest trick in the bag; shoot your painting at an angle so that you minimize glare, and use the perspective crop tool in Photoshop to straighten it out. This is probably the most effective way to eliminate glare, short of professional copy photo set up. But make sure the angle is no more than absolutely necessary, because you are essentially creating uneven distances between your camera and the painting, and that means uneven focus. Not good. You can remedy this a little bit by standing back a ways and using a zoom lens, and a small aperture, but if you're adept at adjusting the aperture on your camera, you probably don't need tips from an amateur like me.

So that's how I deal with glare. Now, color accuracy is quite another matter. The aforementioned color balance setting is a great tool, but it's not perfect. Sometimes you get very accurate colors, other times, you can only get so close. Often I need to rely on Photoshop to do my color correction. But the fact is, the more accurate an image you start out with, the easier it is to achieve the end result. So if there's anything you can do to get a good starting image, that's a huge plus.

You probably know that when pros do it, they use a color strip to ensure all the colors come out accurately. You can do the same by painting a strip of cardboard with different colors (just use tube colors you already have on the palette, plus white and black), and make sure it's visible in your viewfinder. Your digital image now has the color range information. Take this image into Photoshop and before you perspective-crop it out, try auto-adjusting levels, color and contrast. ( Image->Adjustments->Auto Levels, etc.) Usually, this puts the image in the right direction, but more often than not it's too much. So I first copy the original layer, then apply the adjustment on the top layer, then adjust the transparency of the top layer so that the adjustment isn't so drastic. After you're satisfied, flatten the layers back into one.

Only after this adjustment do I perform the perspective-crop. See for yourself what Auto Levels does with and without the color strip in the picture. The difference can be pretty significant.

If the image is still not there, the next thing I try is to fiddle with color balance. (Image->Adjustments->Color Balance). I don't usually have problems with my photos coming out with colors too saturated, but if I do, use the hue/saturation control. (Image->Adjustments->Hue/Saturation). If that still doesn't give you reasonably accurate color, it's time to go back and reshoot your painting under different (hopefully better) lighting conditions and try again.

There are tons of other tools in Photoshop, and an advanced user can manipulate curves and such to get the accurate colors, but for most color corrections, having a color strip, adjusting levels, color balance, and hue/saturation, together with perspective crop, will do the trick.

Lastly, I can't stress enough the importance of NOT doctoring up your digital image to make it look BETTER than your painting. Don't do that. You're only cheating yourself. Color correction should be used to make the image as accurate as possible, not to fake out judges to enter competitions, make a sale online, or to gain gallery representation. That's just outright fraud and it ain't Kosher, to say the least.

If I think of other photo tips, I will mention it in a future post.

Luc Tuymans

“Luc’s small paintings control big spaces, and his paint strokes all connect,” said the realist painter Alex Katz, a longtime fan. “They relate as much to each other as they do to the subject.”

Dan Dos Santos Palette

Titanium White (Winton)
Alizarin Crimson (Winsor & Newton)
Cadmium Red Medium (Rembrandt)
Cadmium Yellow Medium (Rembrandt)
Cadmium Orange Medium (Rembrandt)
Yellow Ochre Light (Rembrandt)
Yellow Ochre (Rembrandt)
Transparent Red Oxide (Rembrandt)
Burnt Umber (Rembrandt)
Yellow Green (Rembrandt)
Sap Green (Rembrandt)
Cerulean Blue (Rembrandt)
Ultramarine Blue (Rembrandt)
Raw Umber (Rembrandt)
Ivory Black (Rembrandt)

Also:
Naples Yellow Light (Rembrandt)
Indian Yellow (Winsor & Newton)
Ultramarine Violet (Rembrandt)


Medium:
1 part Cold Pressed Linseed Oil
1 part Odorless Turpenoid
few drops Cobalt Drier


 Brushes:
1 3/4" Bristle Flat
1" Sable Wash Flat
#20 Kolinsky Sable Round
#4 Badger Fan
#2 Bristle Fan
#14 Synthetic Filbert
#8 Synthetic Filbert
#4 Synthetic Filbert
#2 Synthetic Filbert
#1 Synthetic Filbert
#1 Synthetic Liner